Quadro Quadro16xi Przewodnik Instalacji Pobierz pdf (Strona 42)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 41

Attention: The system is limited to 100 extensions! Once the number of extensions in the Extensions table reaches 100, there will be no more

possibility to add new extensions.

The Extensions table is a list of all extensions and their parameters.

Fig. II-75: Extensions Management page

The following columns are present in the table:

• Extension - lists user or attendant extensions on the Quadro. This number is used for internal PBX calls.

• Display Name - indicates an optional display name to identify the caller.

• Attached Line - indicates the FXS or IP line corresponding extension it is attached to. “R” is displayed in this column when SIP

Remote Extension (see below) functionality is enabled on the extension.

• SIP Address - displays the SIP address of the corresponding extension. The column displays the full SIP address, (i.e.,

username@sipserver:port) when the Registration on SIP Server checkbox is selected. If registration is disabled, the SIP address

will be displayed in the following format: “username, Proxy: sipserver:port”. If no SIP registration server or SIP server port is defined,

corresponding information will not be included in this column. If no username is defined, the extension number will be displayed

instead.

• Percentage of System Memory - indicates the user space (in percentages) configured for each extension. The actual available

duration (in minutes) for the extension voice mails, uploaded/recorded greetings and blocking messages is also displayed here. The

available minutes corresponding to the selected user space are dependent on the Voice Recording codec selected from the Voice

Mail Common Settings page. For example, for the same amount of marked out user space, selection of the G726 voice recording

codec will provide more space for voice mails and user defined voice greetings than the G711 codec selection.

• Call Relay - indicates whether or not the Call Relay option is enabled on the extension.

• Codecs – column lists the short information (full information is seen in the tool tip) about extension specific voice Codecs. Extension

codec’s can be accessed and modified by clicking on the link of the corresponding extension’s Codecs. The link leads to the

Extension Codecs

page.

Clicking on each user extension in the Extensions table will open the extension specific Extension Settings menu. The Pickup Group, Call Park and

Paging Group extensions are displayed without a link in the Extensions Management table and extension pages. Additionally, the supplementary

services configuration pages will not be accessible for this type of extensions.

Add opens the Add Entry page where the type and

number of the new extension should be defined.

This page consists of the following components:

The Extension text field is used to enter a new

extension number. If non-digit symbols have been

entered, the error “Incorrect Extension: no symbol

characters allowed” will appear. If an extension with

the same number already exists in the Extensions

Management table, the error “Extension already

exists” will appear.

Fig. II-76: Extensions Management - Add Entry page

Please Note: Extension number cannot start with the digits 0. You can add extensions of up to 20 digits long. However, the Call Routing won’t be

adjusted automatically; you may need to manually adjust the routing rules for extensions in custom length.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 149 150

Brak uwag

Quadro Quadro16xi Przewodnik Instalacji Strona 42