Quadro Quadro16xi Przewodnik Instalacji Strona 96
- Strona / 150
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Quadro Manual II: Administrator's Guide Administrator’s Menus
Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 95
The Tunnels to Slave Devices page consists of a table where
he SIP Tunnel Name text field requires the tunnel name for
nding connection. System suggests you to start the
IP tunnel name with the “SIP_Tunnel_” words, according to the
utomatic prefix used for the SIP tunnels on the Quadro,
owever this is not mandatory.
he User Name text field requires the authentication user
ame. The field in front of this text field displays the default non-
r SIP tunnels: “SIPTunnel_”.
nnel
when the
slave devices are listed with the corresponding authentication
parameters.
Add functional button leads to the Add Entry page where a new
slave device parameters needs to be provided.
The Add Entry page consists of the following components:
T
the correspo
S
a
h
T
n
editable prefix fo
The Password text field requires the authentication password.
Please Note: The User Name and Password should match
both on master and slave Quadros for the successful SIP tu
establishment.
The Symmetric NAT checkbox should be selected
slave Quadro is located behind the symmetrical NAT.
Fig. II-165: SIP Tunnel Settings – Tunnels to Slave Devices page
Fig. II-166: SIP Tunnel Settings – Tunnels to Slave Devices – Add Entry page
igured.
The Enable Tunnels to Master Devices checkbox enables the
Quadro as a slave device and allows connecting to the master
Quadro via SIP tunnel. When this checkbox is enabled the
Tunnels to Master Devices table needs to be conf
The link Tunnels to Master Devices moves you to the page
where a list of master devices needs to be defined.
Fig. II-167: SIP Tunnel Settings – Tunnels to Master Devices page
he Tunnels to Master Devices page consists of a table where master devices are listed with the corresponding authentication parameters.
on leads to the Add Entry page where a new master device parameters needs to be provided.
he following components:
The Tunnel Name text field requires the SIP tunnel name for
art the
e
Plea
both
esta
T
Add functional butt
The Add Entry page consists of t
The Enable Registration checkbox selection is used to enable
the registration to the corresponding master device.
the corresponding connection. System suggests you to st
P tunnel name with the “SIP_Tunnel_” words, according to theSI
automatic prefix used for the SIP tunnels on the Quadro,
however this is not mandatory.
The User Name text field requires the authentication user
name. The field in front of this text field displays the default non-
editable prefix for SIP tunnels: “SIPTunnel_”.
Th Password text field requires the authentication password.
se Note: The User Name and Password should match
on master and slave Quadros for the successful SIP tunnel
blishment.
Fig. II-168: SIP Tunnel Settings – Tunnels to Master Devices – Add Entry page
he Master device IP text field requires the IP address of the master device.
he Registration Date/Time field displays the time and the date of last registration on the master’s device.
T
The Master device port text field requires the SIP port number of the master device.
The Registration State field displays information whether the slave device is registered on the master or not.
T
- Edition 1, June 2011 1
- Table of Contents 2
- Quadro’s Graphical Interface 6
- Recurrent Buttons 7
- Recurrent Functional Buttons 7
- Administrator’s Menus 8
- System Security Management 12
- • User Rights Management 13
- • IP Line Settings 13
- • Firewall/NAT 13
- Network Status 15
- Memory Status 19
- Hardware Status 20
- SIP Registration Status 20
- IP Lines Registration Status 20
- License Status 21
- IP Routing Configuration 21
- Configuration Management 23
- Time/Date Settings 28
- Mail Settings 29
- SMS Settings 30
- Firmware Update 30
- Automatic Firmware Update 32
- Networking Tools 33
- SNMP Settings 34
- Diagnostics 35
- System Logs 35
- Fig. II-64: Features page 37
- Upload Language Pack 38
- User Rights Management 39
- Users Menu 41
- Extensions Management 41
- User Extension Settings 43
- Call Park Extension Settings 49
- Attendant Extension Settings 55
- • PSTN – calls to PSTN 56
- • User Input 58
- • No input 58
- • Signs (“*” and “#”) 58
- Add Multiple Extensions 61
- Extension Codecs 62
- Call Park Service 63
- Recording Box 64
- Receptionist Management 65
- * key combination (see 67
- Authorized Phones Database 69
- Call Back Services 70
- Telephony Menu 72
- Call Statistics 72
- RTP Statistics 75
- FAX Statistics 76
- SIP Settings 76
- Host aliases for SIP 77
- RTP Settings 77
- NAT Traversal Settings 78
- Line Settings 81
- Onboard Line Settings 81
- IP Line Settings 82
- Supporte 84
- IP Phones Templates 85
- Phones Logo 86
- FXS Gateway Management 87
- Loopback Settings 88
- Hot Desking 88
- FXO Settings 89
- Gain Control 95
- SIP Tunnel Settings 95
- • Failover Rea 100
- Local AAA Table 103
- Global Speed Dial Directory 104
- Allowed C 104
- Best Matching Algorithm 106
- VoIP Carrier Wizard 108
- RADIUS Client Settings 109
- Voice Mail Common Settings 111
- Dial Plan Settings 112
- 3PCC Settings 112
- RTP Streaming Channels 113
- Call Recording Settings 113
- Advanced PPP Settings 117
- VPN Configuration 117
- Dynamic DNS Settings 124
- Firewall and NAT 125
- Advanced Firewall Settings 125
- IP Pool 128
- IDS Log 130
- Network Menu 131
- DNS Settings 131
- DNS Server Settings 131
- Registration Form 134
- Voice Mail Profiles 135
- Administrator’s Logout 139
- Welcome 140
- Administrator Settings 141
- Extension Settings 147
- EPYGI TECHNOLOGIES, LTD 149
- Software License Agreement 149
Powiązane produkty i podręczniki dla Systemy Premise Branch Exchange (PBX) Quadro Quadro16xi
(2 strony)
(11 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji